ZyXEL Communications 5 Series - Page 601

Chapter 33 Maintenance Screens
ZyWALL 5/35/70 Series User’s Guide
601
Send Report to Diagnostic files are sent to the e-mail address specified in this field. If this
field is left blank, diagnostic files will not be sent via e-mail.
SMTP Authentication SMTP (Simple Mail Transfer Protocol) is the message-exchange standard
for the Internet. SMTP enables you to move messages from one e-mail
server to another.
Select the check box to activate SMTP authentication. If mail server
authentication is needed but this feature is disabled, you will not receive the
diagnostic files.
User Name Enter the user name (up to 63 characters) (usually the user name of a mail
account you specified in the Mail Sender field).
Password Enter the password associated with the user name above.
Perform Diagnostics
Now
Click this button to generate and send a diagnostic e-mail immediately,
instead of based on a time period or CPU usage level.
Schedule
Periodic Diagnostics Use these fields to set the ZyWALL to generate and send diagnostic e-mails
at regular intervals.
Even if you enable both CPU utilization-based and periodic diagnostics, the
ZyWALL only sends one diagnostic e-mail within five minutes (unless you
click Perform Diagnostics Now).
Diagnostics Frequency Set how often the ZyWALL generates and sends diagnostic files.
Hourly
Daily
Weekly
None.
If you select Daily or Weekly, specify a time of day for the ZyWALL to
generate and send diagnostic e-mails. If you select Weekly, then also
specify which day of the week. Select None to have the ZyWALL not
generate and send diagnostic e-mails based on a time period.
Day for Diagnostics Use the drop down list box to select which day of the week to generate and
send diagnostic files.
Time for Diagnostics Enter the time of day in 24-hour format (for example 23:00 equals 11:00 pm)
to generate and send diagnostic files.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.
Table 206 MAINTENANCE > Diagnostics (continued)
LABEL DESCRIPTION