Chapter 8 Routing
VMG8924-B10A and VMG8924-B30A Series User’s Guide
134
8.3 The DNS Route Screen
Use this screen to view and configure DNS routes on the Device. Click Network Setting >
Routing > DNS Route to open the following screen.
Figure 68 Network Setting > Routing > DNS Route
The following table describes the labels in this screen.
8.3.1 The DNS Route Add Screen
You can manually add the Device’s DNS route entry. Click Add new DNS Route in the Network
Setting > Routing > DNS Route screen. The screen shown next appears.
Figure 69 DNS Route Add
Table 41 Network Setting > Routing > DNS Route
LABEL DESCRIPTION
Add new DNS
Route
Click this to add a new DNS route.
# This is the index number of a DNS route.
Domain Name This is the host name or domain name of the DNS route entry.
Interface This is the WAN connection through which the Device forwards DNS requests for this domain
name.
Subnet Mask This is the subnet mask of the DNS route entry.
Modify Click the Edit icon to modify the DNS route.
Click the Delete icon to delete the DNS route.
To Next Page
Loading...
Need help?
General
