Chapter 5 Broadband
VMG8924-B10A and VMG8924-B30A Series User’s Guide
59
5.3 The 3G Backup Screen
The USB ports (at the left side panel of the Device) allow you to attach a 3G dongle to wirelessly
connect to a 3G network for Internet access. You can have the Device use the 3G WAN connection
as a backup. Disconnect the DSL and Ethernet WAN ports to use the 3G dongle as your primary
WAN connection. The Device automatically uses a wired WAN connection when available.
Note: This Device supports connecting one 3G dongle at a time.
Figure 26 Internet Access Application: 3G WAN
Use this screen to configure your 3G settings. Click Network Setting > Broadband > 3G
Backup.
QoS
Rate Limit Enter the rate limit for the connection. This is the maximum transmission rate allowed for
traffic on this connection.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 9 Network Setting > Broadband > Add New WAN Interface/Edit (ADSL over ATM - Bridge
Mode) (continued)
LABEL DESCRIPTION
To Next Page
Loading...
Need help?
General
