Chapter 5 Broadband
VMG8924-B10A and VMG8924-B30A Series User’s Guide
66
Figure 31 Network Setting > Broadband > Wan Status
The following table describes the labels in this screen.
5.7 Technical Reference
The following section contains additional technical information about the Device features described
in this chapter.
Encapsulation
Be sure to use the encapsulation method required by your ISP. The Device can work in bridge mode
or routing mode. When the Device is in routing mode, it supports the following methods.
IP over Ethernet
IP over Ethernet (IPoE) is an alternative to PPPoE. IP packets are being delivered across an
Ethernet network, without using PPP encapsulation. They are routed between the Ethernet interface
Table 14 Network Setting > Broadband > Wan Status
LABEL DESCRIPTION
Interface Select a WAN interface to see its historical traffic transmission rate in the chart.
Direction Select RX or TX to display received traffic only or transmitted traffic only in the chart.
Time Interval
Select the time periods to display in the chart. Available choices are Minute, Day, and
Month.
Scan Click this to update the chart according to your selected criteria.
To Next Page
Loading...
Need help?
General
