VMG8924-B10A and VMG8924-B30A Series User’s Guide 295
CHAPTER 32
TR-069 Client
32.1 Overview
This chapter explains how to configure the Device’s TR-069 auto-configuration settings.
32.2 The TR-069 Client Screen
TR-069 defines how Customer Premise Equipment (CPE), for example your Device, can be managed
over the WAN by an Auto Configuration Server (ACS). TR-069 is based on sending Remote
Procedure Calls (RPCs) between an ACS and a client device. RPCs are sent in Extensible Markup
Language (XML) format over HTTP or HTTPS.
An administrator can use an ACS to remotely set up the Device, modify settings, perform firmware
upgrades as well as monitor and diagnose the Device. You have to enable the device to be managed
by the ACS and specify the ACS IP address or domain name and username and password.
Click Maintenance > TR-069 Client to open the following screen. Use this screen to configure
your Device to be managed by an ACS.
Figure 171 Maintenance > TR-069 Client
To Next Page
Loading...
Need help?
General
