Chapter 31 Remote Management
VMG8924-B10A and VMG8924-B30A Series User’s Guide
292
31.3 The Trust Domain Screen
Use this screen to view a list of public IP addresses which are allowed to access the Device through
the services configured in the Maintenance > Remote MGMT screen. Click Maintenance >
Remote MGMT > Turst Domain to open the following screen.
Note: If this list is empty, all public IP addresses can access the Device from the WAN
through the specified services.
Figure 169 Maintenance > Remote MGMT > Trust Domain
The following table describes the fields in this screen.
Port You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Certificate
HTTPS
Certificate
Select a certificate the HTTPS server (the Device) uses to authenticate itself to the HTTPS
client. You must have certificates already configured in the Certificates screen.
Apply Click Apply to save your changes back to the Device.
Cancel Click Cancel to restore your previously saved settings.
Table 138 Maintenance > Remote MGMT (continued)
LABEL DESCRIPTION
Table 139 Maintenance > Remote MGMT > Trust Domain
LABEL DESCRIPTION
Add Trust
Domain
Click this to add a trusted host IP address.
IPv4 Address This field shows a trusted host IP address.
Delete Click the Delete icon to remove the trust IP address.
To Next Page
Loading...
Need help?
General
