Chapter 14 Power Management
VMG8924-B10A and VMG8924-B30A Series User’s Guide
194
Each field is described in the following table.
14.3 The Auto Switch Off Screen
Use this screen to view schedules to turn on or off specific interface(s) and/or all LED lights on the
Device. To access this screen, click Network Setting > Power Management > Auto Switch Off.
Figure 112 Network Setting > Power Managment > Auto Switch Off
The following table describes the labels in this menu.
Table 81 Network Setting > Power Management
LABEL DESCRIPTION
Manually
Switch On/Off
Select POWER ON or POWER OFF to turn on/off the interface or LED lights.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
Table 82 Network Setting > Power Managment > Auto Switch OffNetwork Setting > Power
Managment > Auto Switch Off
LABEL DESCRIPTION
Add or modify
rules
Click this link to create or edit a schedule.
# This is the index number of a schedule rule.
Rule Name This field shows the name of the schedule rule.
Day This field shows which week days (in green) the interface(s) and/or LEDs are turned on and
the days (grayed-out) they are turned off automatically.
Time This field shows the time period the interface(s) and/or LEDs are turned on.
Wireless This field shows whether this schedule applies to the wireless LAN interface.
DSL WAN This field shows whether this schedule applies to the DSL WAN interface.
Eth WAN This field shows whether this schedule applies to the Ethernet WAN interface.
LAN1~LAN4 This field shows whether this schedule applies to the corresponding LAN interface.
LED This field shows whether this schedule applies to the LEDs.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
To Next Page
Loading...
Need help?
General
