ZyXEL Communications VMG8924-B10A Series User Manual

Chapter 12 Interface Group
VMG8924-B10A and VMG8924-B30A Series User’s Guide
182
12.2.2 Interface Grouping Criteria
Click the Add button in the Interface Grouping Configuration screen to open the following
screen.
Figure 104 Interface Grouping Criteria
The following table describes the fields in this screen.
# This shows the index number of the rule.
Filter Criteria This shows the filtering criteria. The LAN interface on which the matched traffic is received
will belong to this group automatically.
WildCard
Support
This shows if wildcard on DHCP option 60 is enabled.
Remove Click the Remove icon to delete this rule from the Device.
Apply Click Apply to save your changes back to the Device.
Cancel Click Cancel to exit this screen without saving.
Table 74 Interface Group Configuration (continued)
LABEL DESCRIPTION
Table 75 Interface Grouping Criteria
LABEL DESCRIPTION
Source MAC
Address
Enter the source MAC address of the packet.
DHCP Option
60
Select this option and enter the Vendor Class Identifier (Option 60) of the matched traffic,
such as the type of the hardware or firmware.
Enable
wildcard on
DHCP
option 60
option
Select this option to be able to use wildcards in the Vendor Class Identifier configured for
DHCP option 60.

ZyXEL Communications VMG8924-B10A Series Specifications

General

Brand	ZyXEL Communications
Model	VMG8924-B10A Series
Category	Wireless Router
Language	English