Chapter 14 Power Management
VMG8924-B10A and VMG8924-B30A Series User’s Guide
196
Each field is described in the following table.
Table 84 Network Setting > Power Management > Auto Switch Off > Add or modify rules > Add
new rule/Edit>
LABEL DESCRIPTION
Rule Name Type up to 31 alphanumberic characters for the name of this rule.
Day Select the week day(s) of the schedule.
Time of Day
Range
Enter the From and To times (in hh:mm format) to set a time period for the schedule. You
can only enter a time period between 00:00 and 23:59.
To set a time period crossing over midnight, you must split the time period into two
schedule rules. For example, for a time period from 10:00 PM to the next day’s 8:00 AM,
you can set one schedule for 22:00~23:59 and another schedule for 00:00~08:00.
Description Enter more information for this rule here.
Apply
Click Apply to save your changes.
Cancel
Click Cancel to restore your previously saved settings.
To Next Page
Loading...
Need help?
General
