Chapter 6 Wireless
VMG8924-B10A and VMG8924-B30A Series User’s Guide
75
Click Network Setting > Wireless to open the General screen.
Figure 33 Network Setting > Wireless > General
The following table describes the general wireless LAN labels in this screen.
Table 15 Network Setting > Wireless > General
LABEL DESCRIPTION
Wireless Network Setup
Wireless You can Enable or Disable the wireless LAN in this field.
Band This shows the wireless band which this radio profile is using.
2.4 GHz is the frequency used by IEEE 802.11b/g/n wireless clients.
5 GHz networks use higher frequencies with less interferences than 2.4 GHz networks and
can offer higher speeds. However, 5 GHz signals do not penetrate solid objects like walls as
well as 2.4 GHz signals can do. It is easy to get signal attenuation if there are many walls
between the Device and a client. 5 GHz is used by IEEE 802.11a/n/ac wireless clients.
To Next Page
Loading...
Need help?
General
