Configuring the traffic interfaces | 78
The interface type for each slot that has been configured with the capacity used by each port.
Total Capacity. The total capacity of the radio link.
Ethernet Capacity. The capacity allocated to the Ethernet traffic over the radio link. This includes
the user and management capacity assigned.
Management Capacity. The capacity allocated to the management conduit over ethernet.
Allocated Capacity. The percentage of the total capacity of the radio link that has been allocated
to traffic interfaces.
Drop and insert capacity. The percentage of the total drop and insert capacity used for local
drop and insert cross connections. The total drop and insert capacity is 65536 kbit/s minus the
assigned radio link capacity.
Some interfaces also require extra bandwidth to be allocated to transport signalling, such as CTS /
DTR handshaking or E&M signals. The cross connections application automatically allocates capacity
for signalling when it is needed.
To Next Page
Loading...
