312 Actual signals and parameters
9912 MOTOR NOM
TORQUE
Calculated motor nominal torque in N·m (calculation is
based on parameter 9909 MOTOR NOM POWER and 9908
MOTOR NOM SPEED values).
0
0…3000.0 N·m Read-only 1 =
0.1 N·m
9913 MOTOR POLE
PAIRS
Calculated motor pole pair number (calculation is based on
parameter 9907 MOTOR NOM FREQ and 9908 MOTOR
NOM SPEED values).
0
- Read-only 1 = 1
9914 PHASE
INVERSION
Inverts two phases in the motor cable. This changes the
direction of the motor rotation without having to exchange
the positions of two motor cable phase conductors at the
drive output terminals or at the motor connection box.
NO
NO Phases not inverted 0
YES Phases inverted 1
9915 MOTOR COS
PHI
When set to 0, an estimated cos phi value is used. 0
0 … 0.97 Active range of the parameter is 0.5 … 0.97 and should be
used when high efficiency motors (IE3 or IE4) are used.
1 = 0.01
All parameters
No. Name/Value Description Def/FbEq
To Next Page
Loading...
