164 Program features
It is also possible to activate jogging function 1 or 2 through fieldbus. Jogging
function 1 uses constant speed 7 and jogging function 2 uses constant speed 6. Both
functions use acceleration/deceleration ramp pair 2.
Settings
Diagnostics
Parameter Additional information
1010 Jogging activation
1208 Jogging speed
1208/1207 Jogging speed for jogging function 1/2 activated through
fieldbus
2112 Zero speed delay
2205, 2206 Acceleration and deceleration times
2207 Acceleration and deceleration ramp shape time: Set to
zero during the jogging (ie, linear ramp).
Actual signal Additional information
0302 Jogging 1/2 activation through fieldbus
1401 Jogging function status through RO 1
1402/1403/1410 Jogging function status through RO 2…4. With option
MREL-01 only.
1805 Jogging function status through DO
To Next Page
Loading...
