ABB ACS850 - Additional parameter data; Terms and abbreviations

Additional parameter data 263
Additional parameter data
What this chapter contains
This chapter lists the parameters with some additional data. For parameter
descriptions, see chapter Parameters on page 101.
Terms and abbreviations
Term Definition
Actual signal Signal measured or calculated by the drive. Usually can only be monitored
but not adjusted; some counters can however be reset by entering 0.
Bit pointer Bit pointer. A bit pointer can point to a single bit in the value of another
parameter, or be fixed to 0 (C.FALSE) or 1 (C.TRUE).
enum Enumerated list, i.e. selection list.
FbEq Fieldbus equivalent: The scaling between the value shown on the panel
and the integer used in serial communication.
INT32 32-bit integer value (31 bits + sign).
No. Parameter number.
Pb Packed boolean.
REAL
REAL24
16-bit value 16-bit value (31 bits + sign)
= integer value
= fractional value
8-bit value 24-bit value (31 bits + sign)
= integer value
= fractional value