194 Parameters
11.42 Freq in 1 min Defines the minimum for the frequency actually arriving at
frequency input 1 (DIO1 when it is used as a frequency input).
The incoming frequency signal (11.38 Freq in 1 actual value)
is scaled into an internal signal (11. 39 Freq in 1 scaled) by
parameters 11.42…11.45 as follows:
0 Hz
0 … 16000 Hz Minimum frequency of frequency input 1 (DIO1). 1 = 1 Hz
11.43 Freq in 1 max Defines the maximum for the frequency actually arriving at
frequency input 1 (DIO1 when it is used as a frequency input).
See parameter 11.42 Freq in 1 min.
16000 Hz
0 … 16000 Hz Maximum frequency for frequency input 1 (DIO1). 1 = 1 Hz
11.44 Freq in 1 at scaled
min
Defines the value that is required to correspond internally to
the minimum input frequency defined by parameter 11.42
Freq in 1 min. See diagram at parameter 11 .42 Freq in 1 min.
0.000
-32768.000 …
32767.000
Value corresponding to minimum of frequency input 1. 1 = 1
11.45 Freq in 1 at scaled
max
Defines the value that is required to correspond internally to
the maximum input frequency defined by parameter 11.43
Freq in 1 max. See diagram at parameter 11.42 Freq in 1 min.
1500.000;
1800.000
(95.20 b0)
-32768.000 …
32767.000
Value corresponding to maximum of frequency input 1. 1 = 1
11.54 Freq out 1 actual
value
Displays the value of frequency output 1 after scaling. See
parameter 11.58 Freq out 1 src min.
This parameter is read-only.
-
0 … 16000 Hz Value of frequency output 1. 1 = 1
11.55 Freq out 1 source Selects a signal to be connected to frequency output 1. Motor speed
used
Zero None. 0
Motor speed used 01.01 Motor speed used (page 152). 1
Output frequency 01.06 Output frequency (page 152). 3
Motor current 01.07 Motor current (page 152). 4
Motor torque 01.10 Motor torque (page 152). 6
DC voltage 01.11 DC voltage (page 152). 7
Power inu out 01.14 Output power (page 153). 8
No. Name/Value Description Def/FbEq16
11.43
11.45
11.42
11.39
f
in
(11.38)
11.44
To Next Page
Loading...
