ABB ACS880-104

Parameters 229
16.28 AI1 force data (Visible when 16.01 Module 3 type = FIO-11 or FA IO - 0 1)
See parameter 14.28 AI1 force data.
0.000 mA
16.29 AI1 HW switch
position
(Visible when 16.01 Module 3 type = FIO-11 or FA IO-0 1)
See parameter 14.29 AI1 HW switch position.
-
16.30 AI1 unit selection (Visible when 16.01 Module 3 type = FIO-11 or FA I O - 0 1)
See parameter 14.30 AI1 unit selection.
mA
16.31 RO status (Visible when 16.01 Module 3 type = FIO-11 or FDIO-01)
See parameter 14.31 RO status.
-
16.31 AI1 filter gain (Visible when 16.01 Module 3 type = FIO-11 or FAIO - 0 1)
See parameter 14.31 AI1 filter gain.
1 ms
16.32 AI1 filter time (Visible when 16.01 Module 3 type = FIO-11 or FAIO - 0 1)
See parameter 14.32 AI1 filter time.
0.100 s
16.33 AI1 min (Visible when 16.01
Module 3 type = FIO-11 or FA IO-0 1)
See parameter 14.33 AI1 min.
0.000 mA or
V
16.34 RO1 source (Visible when 16.01 Module 3 type = FIO-01 or FDIO-01)
See parameter 14.34 RO1 source.
Not
energized
16.34 AI1 max (Visible when 16.01 Module 3 type = FIO-11 or FA I O - 0 1)
See parameter 14.34 AI1 max.
10.000 mA or
V
16.35 RO1 ON delay (Visible when 16.01 Module 3 type = FIO-01 or FDIO-01)
See parameter 14.35 RO1 ON delay.
0.00 s
16.35 AI1 scaled at AI1
min
(Visible when 16.01 Module 3 type = FIO-11 or FA IO-0 1)
See parameter 14.35 AI1 scaled at AI1 min.
0.000
16.36 RO1 OFF delay (Visible when 16.01 Module 3 type = FIO-01 or FDIO-01)
See parameter 14.36 RO1 OFF delay.
0.00 s
16.36 AI1 scaled at AI1
max
(Visible when 16.01
Module 3 type = FIO-11 or FA IO-0 1)
See parameter 14.36 AI1 scaled at AI1 max.
100.000
16.37 RO2 source (Visible when 16.01 Module 3 type = FIO-01 or FDIO-01)
See parameter 14.37 RO2 source.
Not
energized
16.38 RO2 ON delay (Visible when 16.01 Module 3 type = FIO-01 or FDIO-01)
See parameter 14.38 RO2 ON delay.
0.00 s
16.39 RO2 OFF delay (Visible when 16.01 Module 3 type = FIO-01 or FDIO-01)
See parameter 14.39 RO2 OFF delay.
0.00 s
16.41 AI2 actual value (Visible when 16.01 Module 3 type = FIO-11 or FA I O - 0 1)
See parameter 14.41 AI2 actual value.
-
16.42 AI2 scaled value (Visible when 16.01 Module 3 type = FIO-11 or FA I O - 0 1)
See parameter 14.42 AI2 scaled value.
-
16.43 AI2 force data (Visible when 16.01 Module 3 type = FIO-11 or
FAIO - 0 1)
See parameter 14.43 AI2 force data.
0.000 mA
16.44 AI2 HW switch
position
(Visible when 16.01 Module 3 type = FIO-11 or FA IO-0 1)
See parameter 14.44 AI2 HW switch position.
-
16.45 AI2 unit selection (Visible when 16.01 Module 3 type = FIO-11 or FA I O - 0 1)
See parameter 14.45 AI2 unit selection.
mA
16.46 AI2 filter gain (Visible when 16.01 Module 3 type = FIO-11 or FAIO - 0 1)
See parameter 14.46 AI2 filter gain.
1 ms
16.47 AI2 filter time (Visible when 16.01 Module 3 type = FIO-11 or FAIO - 0 1)
See parameter 14.47 AI2 filter time.
0.100 s
No. Name/Value Description Def/FbEq16