ABB ACS880 - Page 272

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
0.00 s / real32(Visible when 16.1 Module 3 type = FDIO-01)
See parameter 14.23 DI3 OFF delay.
DI3 OFF delay16.23
0.00 s / real32(Visible when 16.1 Module 3 type = FIO-01)
See parameter 14.23 DIO3 OFF delay.
DIO3 OFF delay16.23
Input / uint16(Visible when 16.1 Module 3 type = FIO-01)
See parameter 14.24 DIO4 function.
DIO4 function16.24
- / real32(Visible when 16.1 Module 3 type = FAIO-01)
See parameter 14.26 AI1 actual value.
AI1 actual value16.26
Not energized /
uint32
(Visible when 16.1 Module 3 type = FIO-01)
See parameter 14.26 DIO4 output source.
DIO4 output source16.26
- / real32(Visible when 16.1 Module 3 type = FAIO-01)
See parameter 14.27 AI1 scaled value.
AI1 scaled value16.27
0.00 s / real32(Visible when 16.1 Module 3 type = FIO-01)
See parameter 14.27 DIO4 ON delay.
DIO4 ON delay16.27
- / real32(Visible when 16.1 Module 3 type = FAIO-01)
See parameter 14.28 AI1 force data.
AI1 force data16.28
0.00 s / real32(Visible when 16.1 Module 3 type = FIO-01)
See parameter 14.28 DIO4 OFF delay.
DIO4 OFF delay16.28
mA / uint16(Visible when 16.1 Module 3 type = FAIO-01)
See parameter 14.29 AI1 HW switch position.
AI1 HW switch
position
16.29
mA / uint16(Visible when 16.1 Module 3 type = FAIO-01)
See parameter 14.30 AI1 unit selection.
AI1 unit selection16.30
- / uint16(Visible when 16.1 Module 3 type = FDIO-01)
See parameter 14.31 RO status.
RO status16.31
- / uint16(Visible when 16.1 Module 3 type = FIO-01)
See parameter 14.31 RO status.
RO status16.31
1 ms / uint16(Visible when 16.1 Module 3 type = FAIO-01)
See parameter 14.31 AI1 filter gain.
AI1 filter gain16.31
0.100 s / real32(Visible when 16.1 Module 3 type = FAIO-01)
See parameter 14.32 AI1 filter time.
AI1 filter time16.32
0.000 mA or V /
real32
(Visible when 16.1 Module 3 type = FAIO-01)
See parameter 14.33 AI1 min.
AI1 min16.33
Not energized /
uint32
(Visible when 16.1 Module 3 type = FDIO-01)
See parameter 14.34 RO1 source.
RO1 source16.34
Not energized /
uint32
(Visible when 16.1 Module 3 type = FIO-01)
See parameter 14.34 RO1 source.
RO1 source16.34
10.000 mA or V /
real32
(Visible when 16.1 Module 3 type = FAIO-01)
See parameter 14.34 AI1 max.
AI1 max16.34
0.00 s / real32(Visible when 16.1 Module 3 type = FDIO-01)
See parameter 14.35 RO1 ON delay.
RO1 ON delay16.35
0.00 s / real32(Visible when 16.1 Module 3 type = FIO-01)
See parameter 14.35 RO1 ON delay.
RO1 ON delay16.35
0.000 / real32(Visible when 16.1 Module 3 type = FAIO-01)
See parameter 14.35 AI1 scaled at AI1 min.
AI1 scaled at AI1 min16.35
272 Parameters