ABB ACS880 - Page 350

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
Not selected / uint32When bit 0 of parameter 28.21 Constant frequency
function is 0 (Separate), selects a source that activates
constant frequency 1.
When bit 0 of parameter 28.21 Constant frequency
function is 1 (Packed), this parameter and parameters
28.23 Constant frequency sel2 and 28.24 Constant
frequency sel3 select three sources whose states
activate constant frequencies as follows:
Constant fre-
quency active
Source
defined by
par. 28.24
Source
defined by
par. 28.23
Source
defined by
par. 28.22
None000
Constant fre-
quency 1
001
Constant fre-
quency 2
010
Constant fre-
quency 3
011
Constant fre-
quency 4
100
Constant fre-
quency 5
101
Constant fre-
quency 6
110
Constant fre-
quency 7
111
Constant frequency
sel1
28.22
00Not selected
11Selected
2Digital input DI1 (10.2 DI delayed status, bit 0).DI1
3Digital input DI2 (10.2 DI delayed status, bit 1).DI2
4Digital input DI3 (10.2 DI delayed status, bit 2).DI3
5Digital input DI4 (10.2 DI delayed status, bit 3).DI4
6Digital input DI5 (10.2 DI delayed status, bit 4).DI5
7Digital input DI6 (10.2 DI delayed status, bit 5).DI6
10Digital input/output DIO1 (11.2 DIO delayed status, bit
0).
DIO1
11Digital input/output DIO2 (11.2 DIO delayed status, bit
1).
DIO2
See Terms and abbreviations (page 169).Other [bit]
350 Parameters