ABB ACS880 - Page 497

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
- / uint16Selects the followers (out of followers 17…32) whose
status words are monitored by the D2D master.
Note: Also activate communication supervision for the
same followers in parameter 60.20 M/F comm
supervision sel 2.
See parameter 60.23 M/F status supervision sel 1.
M/F status
supervision sel 2
60.24
1 = Status of follower 17 is monitored.Follower 17b0
1 = Status of follower 18 is monitored.Follower 18b1
1 = Status of follower 19 is monitored.Follower 19b2
1 = Status of follower 20 is monitored.Follower 20b3
1 = Status of follower 21 is monitored.Follower 21b4
1 = Status of follower 22 is monitored.Follower 22b5
1 = Status of follower 23 is monitored.Follower 23b6
1 = Status of follower 24 is monitored.Follower 24b7
1 = Status of follower 25 is monitored.Follower 25b8
1 = Status of follower 26 is monitored.Follower 26b9
1 = Status of follower 27 is monitored.Follower 27b10
1 = Status of follower 28 is monitored.Follower 28b11
1 = Status of follower 29 is monitored.Follower 29b12
1 = Status of follower 30 is monitored.Follower 30b13
1 = Status of follower 31 is monitored.Follower 31b14
1 = Status of follower 32 is monitored.Follower 32b15
1 = 10000h…FFFFh
- / uint16In the D2D master, parameters 60.27 M/F status supv
mode sel 1 and 60.28 M/F status supv mode sel 2
specify the mode of follower status word monitoring.
Each follower can individually be set to be monitored
continuously, or only when it is in stopped state.
This parameter selects the mode of status word
monitoring of followers 1…16.
M/F status supv
mode sel 1
60.27
0 = Status of follower 1 is monitored continuously.
1 = Status of follower 1 is monitored only when it is in
stopped state.
Follower 1b0
0 = Status of follower 2 is monitored continuously.
1 = Status of follower 2 is monitored only when it is in
stopped state.
Follower 2b1
0 = Status of follower 3 is monitored continuously.
1 = Status of follower 3 is monitored only when it is in
stopped state.
Follower 3b2
0 = Status of follower 4 is monitored continuously.
1 = Status of follower 4 is monitored only when it is in
stopped state.
Follower 4b3
Parameters 497