Connectors, axis-3 and axis-4 motors
The figure shows the connectors of motors axes 3-6.
xx0900000410
Required equipment
NoteEquipment
Content is defined in section Standard tools
on page 341.
Standard toolkit
These procedures include references to the
tools required.
Other tools and procedures may be required.
See references to these procedures in the
step-by-step instructions below.
Weights
The motors for the different axes weighs according to the table:
Weight in kgMotor
13 kgAxis-1 motor
25 kgAxis-2 motor
13 kgAxis-3 motor
8 kgAxis-4 motor
8 kgAxis-5 motor
8 kgAxis-6 motor
Continues on next page
280 3HAC033453-001 Revision: H
© Copyright 2009-2013 ABB. All rights reserved.
4 Repair
4.7.1 Removing motors
Continued
To Next Page
Loading...
