3.3.2 Inspecting the oil level, axis 2 gearbox
Location of axis 2 gearbox
The axis 2 gearbox is located in the lower arm rotational center, underneath the
motor attachment. The oil plugs are shown in the figure.
xx0800000305
Oil plug, fillingA
Oil plug, draining (Quick connect fitting)B
Required equipment
NoteEquipment
3HAC029646-001Only valid for Other design than Type C:
Oil plug sealing washer, gearbox
See section Type of lubrication in gearboxes
on page 148.
Lubrication oil
For article number see Spare part list on
page 345.
Oil plug (Quick connect fitting)
Content is defined in section Standard tools
on page 341.
Standard toolkit
These procedures include references to the
tools required.
Other tools and procedures may be required.
See references to these procedures in the
step-by-step instructions below.
Continues on next page
3HAC033453-001 Revision: H 121
© Copyright 2009-2013 ABB. All rights reserved.
3 Maintenance
3.3.2 Inspecting the oil level, axis 2 gearbox
To Next Page
Loading...
