ABB IRB 4600 - 60/2.05 - Lifting and Turning a Suspended Mounted Robot

2.3.2 Lifting and turning a suspended mounted robot
Introduction
How to lift and turn the robot to a suspended position using the turning accessory
is described in the lifting instruction delivered with the turning accessory. Article
numbers for the accessory and the instruction is specified in Special tools on
page 342. Contact ABB for more information.
How to lift and turn the robot into position for wall or tilted position: Contact ABB
for more information!
Illustration
xx1000000181
Turning accessoryA
3HAC033453-001 Revision: H 69
© Copyright 2009-2013 ABB. All rights reserved.
2 Installation and commissioning
2.3.2 Lifting and turning a suspended mounted robot