ABB IRB 4600 - 60/2.05 - Installing Options; Installation of Cooling Fan for Motors (Option)

2.5 Installing options
2.5.1 Installation of cooling fan for motors (option)
General
A cooling fan can be installed on motor axis 1 or 2!
Location of cooling fans
The fans are installed on the motors, axes 1-2, as shown in the figure below.
xx0900000135
Fan, motor axis 2A
Fan, motor axis 1B
Protection coverC
Continues on next page
90 3HAC033453-001 Revision: H
© Copyright 2009-2013 ABB. All rights reserved.
2 Installation and commissioning
2.5.1 Installation of cooling fan for motors (option)