3 Maintenance
3.4.4. Oil change, gearbox, axis 3
3HAC027151-001 Revision: B134
© Copyright 2006-2008 ABB. All rights reserved.
2.
WARNING!
Handling gearbox oil involves several safety risks.
Before proceeding, please observe the safety
information in section WARNING - Safety risks during
work with gearbox oil on page 36.
3. Remove the oil plug, filling. Shown in the figure Location of
gearbox on page 132.
4. Refill the gearbox with lubricating oil.
The amount of oil to be refilled depends on the amount
previously being drained. The correct oil level is
detailed in section .
Art. no. and total amount are
specified in Required
equipment on page 132.
5.
NOTE!
Don´t mix Kyodo Yushi TMO 150 with other oil types!
Detailed in section Type of oil in
gearboxes on page 122.
6. Refit the oil plug. Tightening torque: 24 Nm.
Action Note
Continued
To Next Page
Loading...
