3 Maintenance
3.3.11. Inspection, information labels
1513HAC026876-001 Revision: F
© Copyright 2007-2010 ABB. All rights reserved.
Inspection, labels
Action Note
1.
DANGER!
Turn off all electric power, hydraulic and
pneumatic pressure supplies to the robot!
For Foundry Prime robots:
Do not turn off the air pressure to motors and
SMB.
2. Check the labels, located as shown in the
figures.
3. Replace any missing or damaged labels. Art. no. is specified in Required
equipment on page 150.
Continued
To Next Page
Loading...
