ABB IRB 6640 - Page 204

4 Repair
4.2.4. Exchange of parts on Clean room robots
3HAC026876-001 Revision: F202
© Copyright 2007-2010 ABB. All rights reserved.
Assemble
NOTE!
After all repair work, wipe the robot free from particles with spirit on a cloth.
Action Description
1. After the parts is
mounted, clean the
joint free from oil
and grease.
2. Seal the joint with
Sikaflex 521FC.
xx0900000122
3. Smooth the joint
with a tooling pint
that has been
placed in hot water
before use.
xx0900000125
Continued