NoteAction
Sparkplug wrench
xx1500003084
Refit the R1.SMB cable, with the large re-
cess pointing upwards to the right.
Tip
Use a Sparkplug wrench (or similar).
xx1200000888
8
Attachment screw: M6x16 stainless steel
A2-70
xx1500003085
Refit the two earth cables.9
Refitting the cable harness in the lower arm
NoteAction
Run the cable harness up through the lower
arm.
1
Note
Make sure the cable harness is rotated one
revolution between the upper and lower
bracket inside the lower arm, when refitted.
2
Continues on next page
218 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.4.2 Refitting the cable harness
Continued
To Next Page
Loading...
