ABB IRB 8700 Series - Page 539

NoteAction
xx1500002098
Right sideLeft side
Cover washerThrust washer
Remove the thrust washer and cover
washer, and wipe them clean.
Note
Make a note on which side the covers are
placed.
2
Wipe the shafts and the holes for the shafts
clean.
3
Mercasol
xx1500002100
Apply corrosion protection on both sides
of the bearings, and on all machined sur-
faces on the parallel rod.
4
xx1500002098
Right sideLeft side
Cover washerThrust washer
Put back the thrust washer (left side) and
cover washer (right side).
5
Continues on next page
Product manual - IRB 8700 539
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.6.3 Replacing the parallel rod
Continued