ABB IRB 8700 Series - Page 569

NoteAction
O-ring, 3HAB3772-107
xx1200001019
Inspect the o-ring.
Note
Replace if damaged.
4
xx1200001020
Make sure the o-ring is seated in the groove.
Tip
Lubricate the o-ring with some grease for a better
fitting in the groove.
5
Flange sealant: Loctite 574
xx1500002357
Apply flange sealant on the motor flange.6
Continues on next page
Product manual - IRB 8700 569
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.7.1 Replacing the axis-1 motor
Continued