NoteAction
xx1400002584
DANGER
Make sure that the robot is placed in its shipping
position, before removing any of the screws that
secure the robot to the foundation. If not, there is
a risk that the robot will tip over, resulting in injury
or damage.
2
xx1500002295
Unscrew the two attachment screws with washers
that secure the robot to the foundation, situated
closest to where the fork lift accessory pockets
will be attached.
3
xx1500002294
Remove the protection plugs.4
Continues on next page
60 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
2 Installation and commissioning
2.3.1 Lifting the robot with fork lift accessory set installed
Continued
To Next Page
Loading...
