NoteAction
Jog the robot to the specified position:
• Axis 1: no significance, as long as
the robot is secured to the founda-
tion
• Axis 2: comfortable working position
• Axis 3: comfortable working position
• Axis 4: +90°
• Axis 5: no significance
• Axis 6: no significance.
2
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot
working area.
3
Retrieving access to the wrist cabling
NoteAction
DANGER
Make sure that all supplies for electrical
power, hydraulic pressure, and air pressure
are turned off.
1
xx1500003100
Remove the wrist cover.
Note
Do not damage the sealing. Replace if
damaged.
Note
The position of axis-4 depends on the on-
going procedure.
2
xx1500002330
Continues on next page
Product manual - IRB 8700 603
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.7.4 Replacing the axis-5 motor
Continued
To Next Page
Loading...
