ABB IRB 8700 Series - Page 624

NoteAction
xx1300001113
Use caution and push the carrier into posi-
tion.
Tip
Use a screwdriver (or similar) to press the
carrier into position.
3
Attachment screw: M4x10
xx1300000485
Secure the carrier with the M4 screw.
Note
The M4 screw is located at the bottom of
the carrier.
Tip
The M4 screw may be difficult to fit. Make
sure the carrier is level and completely
pressed against the bottom.
4
Attachment screws: M6x12 (2 pcs)
xx1300000484
Secure the cable bracket.5
Continues on next page
624 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.7.5 Replacing the axis-6 motor
Continued