Required documents
Document numberDocument name
3HAC042927-001Technical reference manual - Lubrication in gearboxes
Draining the axis-1 gearbox
Use this procedure to drain the gearbox.
Preparations before draining oil
NoteAction
xx2300000486
Jog all axes to zero position.1
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the safeguarded
space.
2
Draining oil of axis-1 gearbox
NoteAction
WARNING
Handling gearbox oil involves several
safety risks, see Gearbox lubricants (oil or
grease) on page 30.
1
CAUTION
The gearbox can contain an excess of
pressure that can be hazardous. Open the
oil plug carefully in order to let the excess
pressure out.
2
Lay down the robot to let the quick coupling
facing the ground if needed.
3
Continues on next page
102 Product manual - IRB 930
3HAC086009-001 Revision: A
© Copyright 2023 ABB. All rights reserved.
4 Maintenance
4.8.2 Changing oil, axis-1 gearbox
Continued
To Next Page
Loading...
