7.2 Environmental information
Introduction
ABB robots contain components in different materials. During decommissioning,
all materials should be dismantled, recycled, or reused responsibly, according to
the relevant laws and industrial standards. Robots or parts that can be reused or
upcycled helps to reduce the usage of natural resources.
Symbol
The following symbol indicates that the product must not be disposed of as common
garbage. Handle each product according to local regulations for the respective
content (see table below).
xx1800000058
Materials used in the product
The table specifies some of the materials in the product and their respective use
throughout the product.
Dispose components properly according to local regulations to prevent health or
environmental hazards.
Example applicationMaterial
Aluminium
Serial measurement boardBatteries, Lithium
Calibration protection cap and plug and couplings,
connectors and nuts in cable harness
Brass, zink alloys
Cast iron/nodular iron
Serial measurement unit, brake release unitCircuit boards
Cables, motorsCopper
BatteryLithium
Wrist casting, upper arm, back cover, tool flange, etcMagnesium
Brakes, motorsNeodymium
GearboxesOil, grease
Plastic/rubber
Continues on next page
586 Product manual - IRB 930
3HAC086009-001 Revision: A
© Copyright 2023 ABB. All rights reserved.
7 Decommissioning
7.2 Environmental information
To Next Page
Loading...
