NoteAction
xx2100001036
Remove the SMB package attachment screws
and remove the SMB package from the SMB
cover.
3
Separating the battery unit and SMB unit
NoteAction
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
1
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit read the safety information in section The
unit is sensitive to ESD on page 46.
2
xx2100001035
Separate the battery unit from the SMB assembly
by cutting the cable straps.
3
Continues on next page
Product manual - IRB 930 133
3HAC086009-001 Revision: A
© Copyright 2023 ABB. All rights reserved.
5 Repair
5.3.2 Replacing the SMB unit and battery unit
Continued
To Next Page
Loading...
