3.7.3 Installing the Ethernet extension switch
Location
The illustration shows the location of the Ethernet extension switch in the controller.
xx2100000443
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
DSQC10353HAC059187-001Ethernet Extension switch [3014-
1]
Harness A2.X4 - K4.X63HAC076473-001Ethernet Harness
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 414.
-Standard toolkit
-ESD protective wrist band
Continues on next page
Product manual - OmniCore V250XT 121
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
3 Installation and commissioning
3.7.3 Installing the Ethernet extension switch
To Next Page
Loading...
