ABB OmniCore V250XT - Technical Data for Omnicore V250 XT Controller

2.2 Technical data for OmniCore V250XT controller
Overview of the controller
Robot signal exchange proxy, K2
Power unit, A1Drive unit, T4
Connected services (3G/4G/WiFi/Wired), K7
Ethernet switch, K4
Main computer, A2
Motion safety, A2.K3 Fieldbus master, A2.K1
Conveyor tracking unit, B1
Additional I/O unit,
Internal fan, G5 T5,T8 or T6,T9
Power supply
Scalable I/O unit or
Safe I/O unit, K5.1/K3.1 K5.2, K5.3, K5.4
Incoming mains switch, Q0
FlexPendant connector, X4
SMB connector, X2Motor connector, X1 I
ncoming mains connector, X0
Standard fan, G1-G4
Air filter
xx2100000665
OmniCore V250XT, Baseline
OmniCore V250XTReference to circuit diagram
BaselineT4Drive unit
BaselineA1Power unit
Continues on next page
36 Product manual - OmniCore V250XT
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
2 Controller description
2.2 Technical data for OmniCore V250XT controller