5.2.15 Replacing the conveyor tracking module (CTM)
Location
The illustration shows the location of the conveyor tracking module in the controller.
xx2100001164
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
DSQC20003HNA027579-001Conveyor tracking module [3103-
1]
3HNA029345-001CONNECTOR KIT - DSQC2000
Power cable of CTM3HAC069618-001Harness 24V_CTM
3HAC076594-001Ethernet harness for CTM
Continues on next page
Product manual - OmniCore V250XT 293
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.2.15 Replacing the conveyor tracking module (CTM)
To Next Page
Loading...
