ABB OmniCore V250XT - Transporting and Handling; Lifting the Controller Cabinet

3.3 Transporting and handling
3.3.1 Lifting the controller cabinet
Lifting device
Use the four lifting eyes or a fork lift when lifting the controller, as shown below.
The following figure shows the maximum angle between the lifting straps when
lifting the controller. The weight of the controller module is detailed in section
Weight on page 37.
°06
xx2100000343
Product manual - OmniCore V250XT 53
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
3 Installation and commissioning
3.3.1 Lifting the controller cabinet