ABB OmniCore V250XT - Replacing Parts on the Flexpendant; Replacing the Power Cable and Power Cable Cover

5.4 Replacing parts on the FlexPendant
5.4.1 Replacing the power cable and power cable cover
Location
The illustration shows the location of the power cable, power cable gasket, and
power cable cover in the FlexPendant.
A
B
xx1800001154
Power cable coverA
Power cableB
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
Harness-TPU3HAC071006-001Harness TPU connection
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 414.
-Standard toolkit
Continues on next page
Product manual - OmniCore V250XT 337
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the power cable and power cable cover