5.2.17 Replacing the break resistor bleeder
Location
The illustration shows the location of the break resistor bleeder in the controller.
xx2100002189
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT via myABB Business Portal,
www.abb.com/myABB.
Continues on next page
302 Product manual - OmniCore V250XT
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.2.17 Replacing the break resistor bleeder
To Next Page
Loading...
