ABB OmniCore V250XT - On-Site Installation; Required Installation Space

3.4 On-site installation
3.4.1 Required installation space
Dimensions
The following illustration shows the required installation space for the OmniCore
V250XT controller.
Min. 300 mm Min. 150 mm
xx2100001274
• A free space of 300 mm on the back of the controller is required.
• A free space of 150 mm on the sides of the controller is required.
Continues on next page
56 Product manual - OmniCore V250XT
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
3 Installation and commissioning
3.4.1 Required installation space