ABB OmniCore V250XT - Replacing the Standard Fans

5.2.2.1 Replacing the standard fans
5.2.2.1.1 Replacing the standard fans
Removing the standard fans
Preparations
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 28.
1
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
2
xx2100000318
Removing the rear cover on page 177.Remove the rear cover of the controller.3
Removing the standard fans
Note/IllustrationAction
Disconnect standard fan:
• G1.X1-K2.X17
G2.X1-K2.X17
G3.X1-K2.X17
G4.X1-K2.X17
1
Continues on next page
182 Product manual - OmniCore V250XT
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.2.2.1.1 Replacing the standard fans