ABB OmniCore V250XT - Changing;Replacing Activities; Replacement of Air Filter

4.4 Changing/replacing activities
4.4.1 Replacement of air filter
Location
The air filter unit is located as shown in the illustration below.
xx2100000441
Required equipment
NoteEquipment
Air filter
These procedures include references to the
tools required.
Other tools and procedures may be required.
See references to these procedures in the step-
by-step instructions below.
Continues on next page
Product manual - OmniCore V250XT 163
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
4 Maintenance
4.4.1 Replacement of air filter