5.2.11 Replacing the drive unit
Location
The illustration shows the location of the drive unit in the controller.
xx2100000337
WARNING
Do not touch the drive unit when the DC-BUS High Voltage LED is on.
There is residual voltage in the drive unit even if the main switch is in the OFF
position.
Continues on next page
Product manual - OmniCore V250XT 263
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.2.11 Replacing the drive unit
To Next Page
Loading...
