1.8 Safety during troubleshooting
General
When troubleshooting requires work with power switched on, special considerations
must be taken:
• Safety circuits might be muted or disconnected.
• Electrical parts must be considered as live.
• The manipulator can move unexpectedly at any time.
DANGER
Troubleshooting on the controller while powered on must be performed by
personnel trained by ABB or by ABB field engineers.
CAUTION
Risk of hot surfaces that can cause burns.
A risk assessment must be done to address both robot and robot system specific
hazards.
Related information
See also the safety information related to installation, operation, maintenance, and
repair.
32 Product manual - OmniCore V250XT
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
1 Safety
1.8 Safety during troubleshooting
To Next Page
Loading...
