ABB OmniCore V250XT - Replacing the Safety Digital Base Device

5.2.7 Replacing the safety digital base device
Location
The illustration shows the location of the safety digital base device in the controller.
xx2100000458
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
DSQC10423HAC062908-001DSQC1042 Extended safety
3HAC069538-001Connectors Safety I/O
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 414.
-Standard toolkit
-ESD protective wrist band
Continues on next page
222 Product manual - OmniCore V250XT
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.2.7 Replacing the safety digital base device