4.3.3 Cleaning the FlexPendant
Location
The surfaces to clean are shown in the illustration below.
xx1800000128
Touch screenA
Hard buttonsB
Required equipment
NoteEquipment, etc.
ESD protectedSoft cloth
Water/Mild cleaning agent
Clean the touch screen
This section describes how to clean the touch screen.
Info/IllustrationAction
Lock the screen.1
It is safe to clean the FlexPendant
when the Lock screen appears.
2
Clean the touch screen and hard-
ware buttons using a soft cloth and
water or a mild cleaning agent.
3
Unlock the screen, by tapping the
buttons.
4
Cleaning considerations
The section below specifies some special considerations when cleaning the
FlexPendant:
• Use ESD Protection
• Use cleaning equipment as specified above. Any other cleaning equipment
may shorten the life time of the touch screen.
• Check that all protective covers are fitted to the device before cleaning.
• Make sure that no foreign objects or liquids can penetrate into the device.
Continues on next page
Product manual - OmniCore V250XT 161
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
4 Maintenance
4.3.3 Cleaning the FlexPendant
To Next Page
Loading...
