Note/IllustrationAction
Screws: Torx pan head screw M4x8 (4 pcs)Insert the cable grommet assembly into
the cover of the cabinet.
3
xx2100000845
Secure it with the screws.
Concluding procedure
Note/IllustrationAction
Closing the door on page 176.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 166.
2
Product manual - OmniCore V250XT 145
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
3 Installation and commissioning
3.7.7 Installing the cable grommet assembly
Continued
To Next Page
Loading...
