Note/IllustrationAction
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
2
xx2100000318
xx2100000311
Place the standard fan in the bracket.
Position the fan bracket on the controller
using the hooks.
3
xx2100000310
Secure the screws.4
Reconnect:
• G1.X1-K2.X17
G2.X1-K2.X17
G3.X1-K2.X17
G4.X1-K2.X17
5
Continues on next page
184 Product manual - OmniCore V250XT
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.2.2.1.1 Replacing the standard fans
Continued
To Next Page
Loading...
